Download your PDF
Round Pool Volume and Fill-Cost Calculator result sheet — free, supported by sponsors. Your download button appears in 20 seconds.
This free download is supported by sponsors — continuing in
20
Your file is generated in your browser when you choose Download — nothing is uploaded. If this calculator returns enough numeric data, the export also includes its best-fit chart alongside the readable table.
WorldCalculate result export
Round Pool Volume and Fill-Cost Calculator — result sheet
Estimate circular pool water volume, liters, and a scenario fill cost from diameter, average depth, fill percentage, and entered water price.
Inputs used
Results
Visual chart
Breakdown
Calculation steps
Returned data table
Formula and methodology
Formula: Full volume = π(diameter/2)²×average depth; fill volume = full volume×fill percentage/100; fill cost = fill volume×water price per cubic meter.
This page keeps circular pool geometry separate from rectangular pools and uses average depth for a first-pass capacity. It reports a transparent cost scenario only when the visitor supplies a local price, rather than guessing a tariff or delivery charge.
This result follows the calculator's declared inputs, precision, validation boundaries, and model limits.
Input contract
- Pool inside diameter — m; minimum 1.0E-6; maximum 1000000
- Average water depth — m; minimum 1.0E-6; maximum 100000
- Fill percentage — %; minimum 1.0E-6; maximum 100
- Water cost per cubic meter — currency/m³; minimum 0; maximum 1000000
Worked example
| Input | Value |
|---|---|
| Pool inside diameter | 5 |
| Average water depth | 1.2 |
| Fill percentage | 90 |
| Water cost per cubic meter | 2 |
Full volume is about 23.562 m³; at 90% the fill volume is about 21.206 m³ or 21,206 L, with a scenario cost of about 42.412 currency units.
Assumptions and limits
- The pool plan is circular and average depth represents the mean water depth used in the cylinder model.
- Fill percentage is a volume fraction of the geometric capacity.
- Wall slope, steps, liners, displacement, evaporation, treatment, delivery, taxes, and local water rules are not modeled.
Calculator note
Source and methodology
Use the official WorldCalculate methodology policy for the source, formula, precision, and boundary standards behind this calculator.
Planning estimate, not financial, medical, legal, or professional advice. © WorldCalculate — reuse with attribution. Built and curated by Hassan ALRowaie.
No saved result was found. Please run the calculation first, then choose Download again.